Skip to content
GFCI.comGFCI.com

Power cords for Republic of the Congo

11 home & office power cords for Republic of the Congo, from our certification records: 0 carry the approval Republic of the Congo requires and 11 need no national approval there.

11 of these need no national approval in Republic of the Congo.

Home and office power cords for Republic of the Congo

The wall plug used in Republic of the Congo to the IEC 60320 inlet on the equipment — desktops, monitors, printers, chargers and small appliances.

Not on the record for Republic of the Congo yet

  • Data center — IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks Republic of the Congo requires.
  • Industrial — IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

We list a cord here only when our certification record shows it is approved for use in Republic of the Congo or needs no national approval there. Need one of these kinds for Republic of the Congo? Ask us — we quote the cord and file the approval.

"Approved for use in Republic of the Congo" means the cord carries the approval Republic of the Congo requires for its type. "No national approval required in Republic of the Congo" means Republic of the Congo names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.