Skip to content
GFCI.comGFCI.com

Power cords for US Virgin Islands

11 home & office power cords for US Virgin Islands, from our certification records: 0 carry the approval US Virgin Islands requires and 11 need no national approval there.

11 of these need no national approval in US Virgin Islands.

Home and office power cords for US Virgin Islands

The wall plug used in US Virgin Islands to the IEC 60320 inlet on the equipment — desktops, monitors, printers, chargers and small appliances.

Not on the record for US Virgin Islands yet

  • Data center — IEC 60320 jumpers — a C14 or C20 plug into the PDU, a C13, C15 or C19 connector into the server, switch or storage. For most countries these are our global cords: one part number carries the marks US Virgin Islands requires.
  • Industrial — IEC 60309 pin-and-sleeve cords, 16–32 A — the international industrial connector, dual-rated for IEC and North American circuits.

We list a cord here only when our certification record shows it is approved for use in US Virgin Islands or needs no national approval there. Need one of these kinds for US Virgin Islands? Ask us — we quote the cord and file the approval.

"Approved for use in US Virgin Islands" means the cord carries the approval US Virgin Islands requires for its type. "No national approval required in US Virgin Islands" means US Virgin Islands names no national approval for a cord of that type. Need the certificate behind a cord, or a cord for a country not listed? Ask us.