12
configurations
Not sure which cord you need?
Answer a few quick questions and we’ll narrow it down for you.
Made to orderColor — Black
Length — 6 Feet
Made to orderColor — Black
Length — 6 Feet
Made to orderColor — Black
Length — 8 Feet
Made to orderColor — Black
Length — 8 Feet
Made to orderColor — Black
Length — 12 Feet
NEMA L6-15P → C15 Locking (A-Lock)
Made to orderColor — Black
Length — 12 Feet
Made to orderColor — Black
Length — 8 Feet
Made to orderColor — Black
Length — 12 Feet
The plugs and connectors in this collection
What each end is, what it mates with, and where to find every cord built on it.
Plug · NEMA
NEMA L6-15P
- 15 Amps
- 250 volts
On 12 of the cords here
The NEMA L6-15P is a 3 Wire 3 Blade grounded wiring device rated up to 250V AC and 15 Amps.
Mates with NEMA L6-15R Outlet
Connector
NEMA L6-15R
- 15 Amps
- 250 volts
On 3 of the cords here (25%)
The NEMA L6-15R (female receptacle) is a 3 Wire 3 Blade grounded wiring device rated up to 250V AC and 15 Amps. Intended for two-pole, three wire hot-hot-ground circuits with a nominal supply voltage of 240 or 208 V, depending on phase configuration.The locking feature prevents the plug from accidental disconnecting from the outlet, preventing power loss.
Mates with NEMA L6-15P Inlet
Connector · IEC 60320
IEC 60320 C13
- 15 Amps
- 125/250V
On 1 of the cords here (8%)
The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. Most people know the C13 as 'the thing that plugs into my computer' because it is the standard connector used to power most desktop computers. In a desktop computer application, the most common cable is the NEMA 5-15P to C13, which connects your standard North American wall outlet to a desktop computer.
Mates with IEC 60320 C14 Inlet
Connector · IEC 60320
IEC 60320 C15
- 15 Amps
- 125/250V
On 1 of the cords here (8%)
The IEC 320 C15 Power cable is used to power electrical devices that emit so much heat (intentionally or unintentionally) that they require a power connection that can withstand more than the 70 °C (158 °F) temperature rating of the standard C13. In combination with the C14 plug type, the use cases of this high-temperature cable are almost exclusively data center environments. This cable would most likely be found supplying a High-Powered Switch power from a rack-mounted PDU power supply source. If your equipment has a IEC320 C16 Inlet it should only be mated with the matching C15-Power Connector.
Mates with IEC 60320 C16 Inlet
Connector · IEC 60320
IEC 60320 C19
- 20 Amps
- 125/250V
On 1 of the cords here (8%)
The IEC 60320 C19 is a grounded 3 Wire connector rated up to 250V and 20 Amps. The C19 mates with a C20 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device. The C19 is typically used in high powered blade server chassis, large network routers, and other IT equipment that draws more power than a standard C13 can accommodate.
Mates with IEC 60320 C20 Inlet
About NEMA L6-15P GFCI Power Cords
World Cord Sets supplies nema l6-15p gfci power cords from our East Windsor, Connecticut headquarters, with manufacturing across US and overseas facilities. Cords are tested and certified to spec before shipment. We stock 12+ configurations and build custom cords to order — hand-terminated builds from in-stock components typically ship in 3–4 business days. In-stock orders placed by 2:30 PM ET ship the same day from our Connecticut warehouse.
Current rating
15 Amps
Voltage rating
240V
Plug (male end)
NEMA L6-15P
Certifications & compliance
- UL
- RoHS
- Every cord we build is hi-pot tested
- Same-day shipping by 2:30 PM ET
- NET 30/60/90 for approved accounts
- In-house engineering and compliance support
Frequently asked questions
- What certifications do these power cords carry?
- UL and cUL-listed cord sets across the catalog, with 30+ international approval marks (VDE, ENEC, PSE, SAA, CCC, KC and more) on country-specific cords. The approvals each part carries are listed on its product page; documentation is available from sales.
- Do you require a minimum order quantity?
- No. We sell from 1 cord to 100,000. Volume discounts apply automatically at quantity breaks — you'll see pricing tiers on every product page.
- Can I get a custom length or color?
- Yes. Custom lengths and non-standard colors are hand-terminated in our Connecticut shop — typically 3–4 business days from in-stock components. Call (860) 763-2100 or submit a quote request with your specs.
- How fast does this ship?
- In-stock orders placed by 2:30 PM ET ship the same day via FedEx or UPS. All standard configurations are stocked in East Windsor, CT.